Now this is a different one! This hall tree hook has the two out-reaching long arms on top, that appear to invite a hat or cap, and the two short arms at the bottom for coats and scarfs. Between the two is a breast-plate like center piece. The arms are steel with a dark brass finish while the center plate is stamped brass.
To mount the hardware, the center plate (1 1/2″ x 1 1/4″) that rivets the hooks together is fastened to the tree with two screws. The convex brass cover is then placed over the center plate and screwed down.
The top arms are 6 inches long and extend from the surface 4 inches. The two lower arms extend 2 1/2 inches from the base.
Screws will be included.